Klein 3000 Series Operation And Maintenance Manual page 107

Insert a supplied 30-mm,
12.
M10 hex head bolt and
lock washer through the
bracket and into the stud
weldment on the towfish.
Using the 3/4-inch
13.
adjustable wrench, securely
tighten the M10 hex bolt.
Installing the Sub Bottom Profiler
30-mm, M10
hex head
bolt and lock
washer
Inserting an M10 Hex Head Bolt
Figure 7-10:
and Lock Washer into the Aft Sub Bottom
Towfish Mounting Bracket
Figure 7-11: Tightening the M10 Hex Head
Bolt
7-7