B.3 Editing The Tpu/Sp-Iii Tpu Startup File - Klein 4000 Series Operation And Maintenance Manual

Figure B-3:
8. Enter the new address in the Enter New IP Address text box, and then click Set
TPU IP Address
A window opens confirming the change:

B.3 Editing the TPU/SP-III TPU Startup File

The startup file for the TPU/SP-III TPU is startupCdi3000.ini.
To edit the TPU/SP-III TPU startup file:
Connect the supplied Ethernet cable to the LAN connector of the TPU/SP-III
1.
TPU and to the Ethernet port of the laptop computer.
2. Turn on the SonarPro Workstation or the laptop computer and wait for the
Windows desktop to appear.
3. Turn on the TPU, or turn on the SP-III TPU by switching the A/C-D/C switch to
A/C for AC operation or to D/C for DC operation.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
Editing the TPU/SP-III TPU Startup File
The Klein Linux TPU Updater Dialog Box with Current TPU/SP-III
TPU IP Address Displayed
.
B-3