Software Troubleshooting; Problem Troubleshooting - Klein 3000 Series Operation And Maintenance Manual

C-40
APPENDIX C General Setup, Configuration and Troubleshooting
C.7 Software Troubleshooting
If for some reason SonarPro will not open, or SonarPro gets saved in some
corrupted condition and will not operate, you can recover to the default installation
condition by editing the operating system's Registry.
To edit the registry:
1. Select Start/Run, enter REGEDT in the Open text box, and then click OK .
2. Navigate the path My Computer/HKEY_CURRENT_USER/Software/Klein
Associates.
3. Select and then delete SonarPro.
4. Start SonarPro, and then select New State from the Session Menu.
To totally remove C-Maps from the registry:
1. Select Start/Run, enter REGEDT in the Open text box, and then click OK .
2. Navigate the path My Computer/HKEY_CURRENT_USER/Software.
3. Select and delete C-Map.
4. Navigate the path My Computer/HKEY_LOCAL_MACHINE/Software.
5. Select and delete C-Map.
6. Select and delete Aladin.
C.8 Problem Troubleshooting
For general troubleshooting refer to Table C-2.
No operation, but the LOCK LOSS and
Carrier Loss lights are off.
TPU not functioning properly for no
apparent reason.
Series 3000 Sonar System Operations and Maintenance Manual
General Troubleshooting
Table C-2:
PROBLEM CHECK
Ethernet Hub.
LAN cables.
Path and location path to vxWorks.
Network setup on the computer and TPU.
Check for proper AC voltage setting.
Check AC fuses.
Replace boards one at a time.
11210066, Rev. 11