Brake Pedal (Lhd) - Exploded View; Separating Brake Pedal From Brake Servo - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
Brake system - Edition 03.2013
5

Brake pedal (LHD) - exploded view

WARNING
The brake pedal travel must not be restricted by additional floor
coverings.
♦ Lubricate all bearings and contact surfaces with grease, Part
No. G 000 450 02.
1 - Hexagon bolt
2 - Brake pedal mounting
bracket
3 - Hexagon nut
❑ Tightening torque: 25
Nm
4 - Torx socket head bolt -T45-
❑ Tightening torque: 25
Nm
5 - Tube
6 - Brake pedal
❑ Insert tube
⇒ Item 5 (page 74)
❑ Removing and installing
⇒ page 76
7 - Hexagon socket head bolt
❑ Tightening torque: 9 Nm
❑ The 3 hexagon head
bolts locate the acceler‐
ator pedal module from
the other side.
8 - Accelerator pedal
9 - Torx socket head bolt -T45-
❑ Tightening torque: 40
Nm
10 - Spacer sleeve
❑ With bonded gasket
11 - Mounting bracket for pedal
cluster
❑ Illustration for automatic
gearbox
12 - Mounting
❑ For ball head of brake servo push rod
13 - Bearing shell
14 - Insulation cover
5.1 Separating brake pedal from brake ser‐
vo
Special tools and workshop equipment required
74
Rep. gr.46 - Brakes - mechanism
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.