Connecting the liquid waste line
Required materials
•
Chemical-resistant, powder-free gloves
•
Waste container
To connect the liquid waste line:
1.
Place a suitable waste container below the mass spectrometer.
2.
Slide a drain line over the barbed fitting of the drain (located at the
bottom, left-hand side of the mass spectrometer).
B-22
External Connections
The waste line and connection can be contaminated with
Warning:
biologically hazardous materials. Always wear chemical-resistant,
powder-free gloves while performing this procedure.
To avoid distorting the drip tray or causing the drain cup
Caution:
to leak, restrain the drain cup when attaching or removing the
waste line.
Drain line
Drain cup
Barbed fitting
TP02684