5
Installation
5.3
Installing the safety card
5- Montage_S1
Installing the safety card
5300
Installing the safety card
5.3
1.Remove the film.
4. Using suitable pliers, pull out the blank in the safety card plug
The expansion card is installed in slot 3 of the servo amplifier. When in-
stalling, please note the guidelines given under "Installation" in the op-
erating manual for the servo amplifier.
2. Break the middle link
3. Break the top link and lever out the
cover plate
5. Plug in the safety card and tighten
the screws
5-3