I/O Modules With Pluggable Wiring Level (Series 753); Figure 15: Plug And I/O Module; Figure 16: Assignment Of I/O Module To Plug Using Mini-Wsb Tags - WAGO 750 Series Manual

38 Mounting
6.3 I/O Modules with Pluggable Wiring Level (Series
753)
For wiring, a plug is plugged into the bottom of the module of all 753 Series I/O
modules. The plug can be completely removed together with the wiring,
simplifying replacement of defective modules from the assembly.
Plugs and coding fingers are not included in the scope of supply!
Plugs of the 753 Series and coding fingers are not included in the scope of
supplied items and may be ordered as accessory items!

Figure 15: Plug and I/O Module

Miniature WSB marking tags ensure that the right plug is matched up with the
right I/O module (see figure below).

Figure 16: Assignment of I/O Module to Plug Using Mini-WSB Tags

This plug provides an option for attaching cable binders.
Manual
Version 1.1.0
753-646 KNX/EIB/TP1 Module