Cage Clamp; Figure 4: Cage Clamp ® Connectors; Table 6: Legend For Figure "Cage Clamp ® Connectors - WAGO 750 Manual

22 Device Description
3.2.3

CAGE CLAMP

Figure 4: CAGE CLAMP
Table 6: Legend for Figure "CAGE CLAMP
Channel
1
2
3
4
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Shield Connection System for Electromagnetic Compatibility!
The WAGO Shield Connection System offers a full range of accessories for
maintaining electromagnetic compatibility (EMC)! Related information is available
at www.wago.com.
Manual
Version 1.0.0
All manuals and user guides at all-guides.com
®
Connectors
®
Connectors
®
Connectors"
Designation Connection
+AI1
−AI1
+AI2
−AI2
+AI3
−AI3
+AI4
−AI4
WAGO-I/O-SYSTEM 750
750-471 4AI U/I Diff Galv
Function
1 + Current signal, voltage signal
5 − Current signal, voltage signal
2 + Current signal, voltage signal
6 − Current signal, voltage signal
3 + Current signal, voltage signal
7 − Current signal, voltage signal
4 + Current signal, voltage signal
8 − Current signal, voltage signal