Rtc/Usb Host Interface Board: B-Ex700-Rtc-Qm-R; Rfid Module: B-Ex700-Rfid-H1-Qm-R - Toshiba B-EX4 SERIES Product Description

3. OPTIONAL KIT
3.4 EXPANSION I/O CARD: B-EX700-IO-QM-R
This interface board is used to connect the printer to external devices, such as a labeler. The
input/output signals from the connected external devices can control label feeding or printing and
indicate the print status.

3.5 RTC/USB host INTERFACE BOARD: B-EX700-RTC-QM-R

Installing this board enables a connection USB memory.
* Conforming to USB 1.1 USB HOST
* Supporting Full-speed (12M bps) transmission

3.6 RFID MODULE: B-EX700-RFID-H1-QM-R

Installing this module enables the printer to write data on an RFID tag as well as to print on the surface
of RFID supplies.
The three RFID module types are different from each other in frequency band and applicable countries.
HF RFID kit destined for Europe (RFID module and antenna are locally purchased.)
Although the specified frequency band can be used in the other countries than Europe, the destination
is limited to Europe because the certification is obtained only for Europe.
Specification
Module
Frequency
Output power
Environmental standard
Available RFID tags
Antenna cover
Ribbon guide
RFID module plate
Antenna frame
Cord bush
Cable clamp
Harness
Screws
Item
TagSys MEDIO S002 (Locally purchased)
13.56MH
200mW
RoHS Directive
TagSys C210, C220, C240, I-Code, Tag-it,
ISO15693
3.4 EXPANSION I/O CARD: B-EX700-IO-QM-R
Nylon washer
Spacer
Installation
Manual
Description
3-6
EO10-33024