Rfid Module Setting - Toshiba B-SX6T SERIES System Mode Manual

2. SYSTEM MODE
2.9

RFID Module Setting

Outline of the RFID Module Setting
In the RFID Module Setting mode, you can set various parameters related to the RFID module.
It is necessary to set these parameters before operating the RFID module.
If a read or write error occurs frequently, adjust the values for the parameters.
The RFID Module Setting menu contains the following:
<10>RFID
[PAUSE]
<10>RFID
READ TEST OFF
[PAUSE]
<10>RFID
MODULE NONE
[PAUSE]
<10>RFID
TAG NONE
[PAUSE]
<10>RFID
ERR CHK OFF
[PAUSE]
<10>RFID
ISSUE RETRY 3
[PAUSE]
<10>RFID
R CYCLE CNT 5
[PAUSE]
<10>RFID
R CYCLE TIM 4.0
[PAUSE]
RFID read test
RFID module type
RFID tag type
RFID error tag detection
Maximum number of issue
retries
Maximum number of read
retries
Read retry time-out
<10>RFID
W CYCLE CNT 5
[PAUSE]
<10>RFID
W CYCLE TIM 2.0
[PAUSE]
<10>RFID
ADJ RETRY +00
[PAUSE]
<10>RFID
POWER LEVEL 18
[PAUSE]
<10>RFID
AGC THRESHOLD 0
[PAUSE]
<10>RFID
Q VALUE 2
[PAUSE]
<10>RFID
WT AGC 11
[PAUSE]
<10>RFID
WT MIN AGC 11
[PAUSE]
2-73
EO13-33002
(Revision Date: Jul. 24, 2008)
2.9 RFID Module Setting
Maximum number of write
retries
Write retry time-out
RFID adjustment for retry
Radio output power level
setting
RFID AGC threshold setting
RFID Module Q Value Setting
AGC threshold for data write
setting
AGC threshold lower limit for
retry setting