Delta AH Series Operation Manual page 92

AH Mo t io n C on tr o ll er – O p er a t io n M a nu a l
If you want to change the value in a device, you can click the device, right-click the device, click Change Present Value
on the context menu, and set a present value in the Enter Present Value window.
The Enter Present Value window is described below.
_4
 Message
 You can type a value in the Present Value box.
 Name of a device or a symbol whose present value will be changed
 You can type a 16-bit value or a 32-bit value.
 Value change history (Format: Device name Value)
 In the binary mode, you can set the states of the bits through the mouse.
 The setting values will be applied after OK is clicked. The window will be closed after Cancel is clicked.
 You can display or hide the binary mode.
In this example, X0.0~X0.15 and Y0.0~Y0.15 are input devices and output devices assigned to the digital I/O module
AH16AP11R-5A. After the parameters in the hardware are downloaded to the CPU module, the states of X0.0~X0.15 will
be the same as the states of the inputs on the actual module. Even if you set X0.0~X0.15 to ON or OFF in the program
editing window, the states of X0.0~X0.15 will be updated by the actual input signals.
4 - 4 2