Delta AH Series Operation Manual page 193

If restoration source/restoration destination contains a password and an ID, the password and the ID will be processed
as follows.
Data restoration
Memory cardCPU
ComputerCPU
Computer ISPSoft project
(5) After the data restoration is performed, you can click Home or Close in the CARD Utility window.
a. The ID in the backup file must be the same as the ID in the CPU, otherwise
the data restoration will not be performed.
b. If there is a PLC password in the CPU, the password in the backup file must
be the same as the PLC password in the CPU. Otherwise the data restoration
will not be performed.
c. If there is no PLC password in the CPU, and there is a password in the
backup file, the system will perform the data restoration, and the password in
the backup file will become the PLC password in the CPU.
a. The ID in the backup file must be the same as the ID in the CPU, otherwise
the data restoration will not be performed.
b. If there is a PLC password in the CPU, the password in the backup file must
be the same as the PLC password in the CPU. Otherwise the data restoration
will not be performed, and a message will appear.
c. If there is no PLC password in the CPU, and there is a password in the
backup file, the system will perform the data restoration, and the password in
the backup file will become the PLC password in the CPU.
Program ID and the project password remain unchaged in an ISPSoft project.
Ch a pt er 8 M em or y C ar d
Description
8_
8 - 1 7