Delta AH Series Operation Manual page 233

Error Code
The contents of the system backup file
16#001A
(.dup file) are incorrect.
The communication setting of COM1 is
16#0033
incorrect. (SM9)
The setting of the station address of
16#0034
COM1 is incorrect. (SM9)
The setting of the communication type of
16#0035
COM1 is incorrect. (SM9)
The communication setting of COM2 is
16#0038
incorrect. (SM9)
The setting of the station address of
16#0039
COM2 is incorrect. (SM9)
The setting of the communication type of
16#003A
COM2 is incorrect. (SM9)
An error occurs when the system is
16#0066
backed up.
The size of the PLC parameters restored
16#0067 exceeds the size of the PLC parameters
of the CPU module.
There is no END in the program in the
16#2000
PLC. (SM5)
The program is incorrect. There is a
16#2001
syntax error.
Description
Ch a pt er 9 T r o u bl es h oo t in g
Corrective action
Create the system backup file again.
1. Check the program and the related special data
registers.
2. Set the communication port parameter for the CPU
module in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the communication port parameter for the CPU
module in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the communication port parameter for the CPU
module in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the communication port parameter for the CPU
module in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the communication port parameter for the CPU
module in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the communication port parameter for the CPU
module in HWCONFIG again.
1. Check whether the memory card is normal, and
whether the capacity of the memory card is large
enough.
2. Retry the backup procedure. If the error still occurs,
please contact the factory.
The error code is appeared to indicate alarm only.
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
Check the program, compile the program again, and
download the program again.
9_
9 - 3 9