Delta AH Series Operation Manual page 231

Error Code
16#001D Timed interrupt 2 is set incorrectly.
16#001E Timed interrupt 3 is set incorrectly.
The watchdog timer is set
16#001F
incorrectly.
The setting of the fixed scan time is
16#0020
incorrect.
The setting of the fixed scan time is
16#0021
incorrect.
The CPU parameter downloaded to
16#0022
the PLC is incorrect.
CPU parameters setting error. The
16#0023
state of Y devices when the CPU is
set from STOP to RUN is incorrect
The Communication Ratio box in the
Communication Loading of Scan
16#0026 Time (%) section in the PLC
Parameter Setting window is set
incorrectly.
The latching auxiliary relay range
16#0027
which is set is incorrect.
The latching data register range
16#0028
which is set is incorrect.
The latching timer range which is set
16#0029
is incorrect.
The latching counter range which is
16#002A
set is incorrect.
The latching 32-bit counter range
16#002B
which is set is incorrect.
The memories in the latched special
16#0050
auxiliary relays are abnormal.
The latched special data registers
16#0051
are abnormal.
The memories in the latched
16#0052
auxiliary relays are abnormal.
Description
Ch a pt er 9 T r o u bl es h oo t in g
Corrective action
Set the CPU parameter in HWCONFIG again, and
download the CPU parameter again.
Set the CPU parameter in HWCONFIG again, and
download the CPU parameter again.
Set the CPU parameter in HWCONFIG again, and
download the CPU parameter again.
Set the CPU parameter in HWCONFIG again, and
download the CPU parameter again.
Set the CPU parameter in HWCONFIG again, and
download the CPU parameter again.
Download the CPU parameter again.
Adjust the CPU parameters setting in HWCONFIG and
download it to PLC again.
Reset the CPU or set the CPU to the default settings, and
download the program and parameters again.
Reset the CPU or set the CPU to the default settings, and
download the program and parameters again.
Reset the CPU or set the CPU to the default settings, and
download the program and parameters again.
Reset the CPU or set the CPU to the default settings, and
download the program and parameters again.
Reset the CPU or set the CPU to the default settings, and
download the program and parameters again.
Reset the CPU or set the CPU to the default settings, and
download the program and parameters again.
After users reset the CPU module or restore it to the factory
setting, they can download the program and the parameter
again.
After users reset the CPU module or restore it to the factory
setting, they can download the program and the parameter
again.
After users reset the CPU module or restore it to the factory
setting, they can download the program and the parameter
again.
9_
9 - 3 7