Delta AH Series Operation Manual page 159

Function buttons for E-CAM chart:
Icon Name
Insert a point
Insert a section
E-CAM setting
Export
Import
Insert a row
Delete a row
The operation and setting steps by using the function buttons are explained as below.
(Insert a point) and move the cursor to the position where you want to create a data point. Click
You can click
at the position to create the data point, and the position/velocity/acceleration data of the data point will also be
inserted in the Data setting area as below.
Ch ap te r 7 M oti on Co n tro l Prog ram m ing
Inserting an data point to the position curve in the E-CAM curve area
Inserting a section with two end points into the position curve in the E-CAM curve
area
Opening the E-CAM setting window
Exporting the E-CAM data in .txt format and speicifying the directory for saving
this file.
Importing the E-CAM file from the specified directory
Inserting a row under the selected row in the Data setting area
Deleting a selected row in the Data setting area.
Description
7_
7 - 3 3