Delta AH Series Operation Manual page 204

Motion controller
Hide thumbs Also See for AH Series:
Table of Contents

Advertisement

AH Mo t io n C on tr o ll er – O per a ti o n M an u a l
Error code
The actual arrangement of the I/O modules is not consistent with
16#1402
the module table. (SM9)
16#1403
An error occurs when the data is read from the module. (SM9)
16#1405
The setting parameter of the module is not found. (SM9)
16#140B
The number of network modules exceeds the limit. (SM9)
16#140C
The checksum of the high-speed data exchange is incorrect.
16#140D
The ID of the actual power supply module is not the same as the ID
of the power supply module set in HWCONFIG. (SM9)
16#140E
The amount of data exchanged at a high speed exceeds the
maximum amount supported.
16#140F
High-speed data exchange error
16#1801
There is no interrupt service routine in the CPU module.
16#2000
There is no END in the program in the PLC. (SM5)
16#2001
The program is incorrect. There is a syntax error.
16#2002
GOEND is used incorrectly. (SM5)
16#2003
The devices used in the program exceed the range. (SM0/SM5)
The part of the program specified by the label used in CJ/JMP is
16#2004
incorrect, or the label is used repeatedly. (SM0/SM5)
The N value used in MC is not the same as the corresponding N
16#2005
value used in MCR, or the number of N values used in MC is not the
same as the number of N values used in MCR. (SM5)
The N values used in MC do not start from 0, or the N values used
16#2006
in MC are not continuous. (SM5)
16#2007
The operands used in ZRST are not used properly. (SM5)
16#200A
Invalid instruction (SM5)
The operand n or the other constant operands exceed the range.
16#200B
(SM0/SM5)
16#200C
The operands overlap. (SM0/SM5)
An error occurs when the binary number is converted into the
16#200D
binary-coded decimal number. (SM0/SM5)
16#200E
The string does not end with 0x00. (SM0/SM5)
The instruction does not support the modification by an index
16#200F
register. (SM5)
_9
9 - 1 0
Description
LED indicator
status
CPU
Status
BUS
ERROR
FAULT
Stop
Keep
ON
Stop
Keep
ON
Stop
Keep
ON
Stop
Keep
ON
Stop
Keep
ON
Stop
Keep
ON
Stop
Keep
ON
Stop
Keep
ON
Continue
Keep
Keep
Stop
Blinking
Keep
Stop
Blinking
Keep
Stop
Blinking
Keep
Self-define
Blinking
Keep
d
Stop
Blinking
Keep
Stop
Blinking
Keep
Stop
Blinking
Keep
Stop
Blinking
Keep
Stop
Blinking
Keep
Self-define
Blinking
Keep
d
Self-define
Blinking
Keep
d
Self-define
Blinking
Keep
d
Self-define
Blinking
Keep
d
Stop
Blinking
Keep

Advertisement

Table of Contents
loading

Table of Contents