Delta AH Series Operation Manual page 151

Setting a Master Axis

You can set a master axis by Master in the motion control function block MC_CamIn.
Value of the Master
Input value
1~n Motion axis
200 Counter
204 Counter
208 Counter
212 Counter
216 Counter
220 Counter
Definition
A motion axis 1~n is used as a master axis (AH08EMC: n=8，
AH10EMC: n=16, AH20EMC: n=32)
The counter AC00 is used as a master axis.
The counter AC04 is used as a master axis.
The counter AC08 is used as a master axis.
The counter AC12 is used as a master axis.
The counter AC16 is used as a master axis.
The counter AC20 is used as a master axis.
Ch ap te r 7 M oti on Co n tro l Prog ram m ing
Description
7_
7 - 2 5