Table of Contents
Advertisement
SIS Configuration
and Control
The DTP2 CrossPoint 82 switchers can be configured and controlled via Extron Simple
Instruction Set (SIS) commands when connected to a host computer or other device
(such as a control system). Attach the host device to the rear panel RS-232 connector
or LAN connector, or to the front panel USB port. Commands can be entered using a
Telnet application such as the Extron DataViewer, available at
DataViewer Help file for more details). The default protocol for the RS-232 connection is
9600 baud, 8 data bits, 1 stop bit, no parity, and no flow control. This section describes SIS
communication and control. Topics in this section include:
•
•
•
Host and Switcher Communication
SIS commands consist of one or more characters per field. No special characters are
required to begin or end a command sequence. When the switcher determines that a
command is valid, it executes the command and sends a response to the host device. All
responses from the switcher to the host end with a carriage return and a line feed
(CR/LF = ] ), indicating the end of the response character string (one or more characters).
Copyright Messages
The copyright message is displayed upon connecting to a switcher via TCP/IP or Telnet or
after a power cycle via RS-232, and depends on the switcher model.
] (c) Copyright
60-1812-0
Ddd
•
•
•
•
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • SIS Configuration and Control
Host and Switcher Communication
SIS Overview
Command and Response Tables for SIS Commands
, Extron Electronics, DTP2 CrossPoint 82 <model>, V
YYYY
]
n
,
MMM
:
:
] (day, date, and time as in Mon, 09 Dec 2019 11:27:33)
DD
YYYY HH
MM
SS
YYYY is the year.
<model>, if applicable, is IPCP SA or IPCP MA 70
60-18nn-0
is the model part number:
n
DTP2 CrossPoint 82 base model — 60-1812-01
•
DTP2 CrossPoint 82 IPCP SA — 60-1812-02
•
DTP2 CrossPoint 82 IPCP MA 70 — 60-1812-03
•
V
is the firmware version number.
n.nn
www.extron.com
(see the
n.nn
,
53
Advertisement
Table of Contents
