Table of Contents
Advertisement
Ethernet monitoring and control on each Ethernet port — Manage, monitor, and
•
control AV devices using a standard Ethernet network.
•
DHCP server for AV LAN — Automatically distributes IP addresses and network
configuration parameters for AV devices connected to the local AV LAN, which
streamlines system setup and management.
Supports popular Building Management System (BMS) protocols, such as
•
BACnet, KNX, and DALI — These protocols allow for centralized monitoring and
control of mechanical and electrical systems that include HVAC, lighting, power, and
closed-circuit camera control.
•
Supports 10/100/1000Base-T networking standards
•
Supports Ethernet-controllable devices — Allows for control of multiple Ethernet-
enabled AV devices such as displays, switchers, and sources.
•
Automatic clock synchronization allows a touchpanel to display the accurate
time and date
•
Supports control system synchronization — Synchronization allows users to retain
and recover the state of their configured endpoints in case of network or power failure.
Front panel port status indicator LEDs
•
•
Multi-level password protection — Allows security to be set based on user roles.
NOTE: The initial factory configured passwords for all accounts on this device have
been set to the device serial number. Passwords are case sensitive. In the event of
an absolute system reset, the passwords are reset to no password.
Fully customizable using Extron control system software — GUI Designer can be
•
combined with Global Configurator Plus or Global Configurator Professional.
•
Create controller groups — Allows multiple IP Link Pro control processors to
be grouped together to function as one when configured with Global Configurator
Professional.
Library of enhanced Extron Certified device drivers — Device drivers allow Extron
•
products to control various display and source devices, such as projectors, flat panel
displays, and Blu-ray Disc players. Extron has produced fully tested Ethernet, serial, and
IR device drivers.
•
Supports DisplayPort Single Stream Transport (SST) data rates up to 21.6 Gbps.
•
Supported HDMI 2.0 specification features include data rates up to 18 Gbps,
Deep Color, and HD lossless audio formats.
•
Stereo audio embedding and de-embedding — Analog audio signals can be
embedded onto the DTP2 output, and embedded two channel PCM audio can be
extracted to the analog outputs.
•
RS-232 insertion from the Ethernet control port — Saves system resources and
simplifies installation by enabling a control processor to access remote RS-232 devices
over Ethernet.
•
Consumer Electronics Control (CEC) capability — Standard, built-in CEC
commands can be triggered to control displays or other AV devices connected to the
HDMI and DTP2 outputs. Each video output can deliver CEC commands independently.
The ability to control specific functions, such as power on and off, input selection, or
volume level, is dependent on implementation by the device manufacturer.
•
Integrated DTP2 extension supports transmission of video, audio, and control
up to 330 feet (100 meters) over a shielded CATx cable.
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal
performance.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Introduction
6
Advertisement
Table of Contents
