Table of Contents
Advertisement
Introduction
This section provides general information about this guide and the Extron
DTP2 CrossPoint 82 switchers. Topics in this section include:
•
•
•
•
•
About this Guide
This guide describes how to install, operate, and configure the DTP2 CrossPoint 82
Seamless Scaling Presentation Matrix Switchers.
In this guide, the
CrossPoint 82 models. The terms "switcher" and "matrix switcher" are used interchangeably
to refer to any of the DTP2 CrossPoint 82 models.
The following terms refer to groups of DTP2 CrossPoint 82 models:
•
•
Product Description
The Extron DTP2 CrossPoint 82 switchers are eight-input seamless scaling presentation
matrix switchers that support video input signal resolutions up to 4K @ 60 Hz at 4:4:4,
and output signals up to 4K @ 30 Hz. All models incorporate Extron-patented Vector 4K
seamless scaling technology engineered for the most demanding applications. They feature
DisplayPort, HDMI, and DTP2 inputs, an HDMI output, and a scaled DTP2 output extension
to send video, audio, and control signals up to 330 feet (100 meters) over a shielded CATx
cable.
The DTP2 CrossPoint 82 switchers deliver excellent image quality, fast and reliable
automatic switching, Extron ProDSP audio processing (including audio embedding and
de-embedding, and Mic/Line mixing with ducking, feedback suppression, and Phantom
power), Extron ProDSP audio configuration, seamless video transition effects, logo keying,
and HDMI loop-out. The switchers can be controlled and configured via Ethernet, RS-232,
or USB.
The DTP2 CrossPoint 82 IPCP SA and IPCP MA 70 models each have a built-in Extron
IPCP Pro 355M Control Processor, and an integrated class D power amplifier.
•
•
About this Guide
Product Description
Features
Setup and Configuration Methods
Application Diagrams
model names
"Base model" refers to the basic DTP2 CrossPoint 82 containing no amplifier module.
"Amplifier models" and "IPCP models" refer to DTP2 CrossPoint 82 IPCP SA and the
DTP2 CrossPoint 82 IPCP MA 70 models.
DTP2 CrossPoint 82 IPCP SA supports stereo audio output from a 2 x 25 watts
amplifier.
DTP2 CrossPoint 82 IPCP MA 70 supports mono audio output from a 100 watts
amplifier.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Introduction
as listed on the next page refer to specific DTP2
1
Advertisement
Table of Contents
