Table of Contents
Advertisement
2.
Set the time, date, and time zone as desired:
•
Date and Time — In the Date | Time field (see figure 53,
page), either click on the hour and minute text fields and type in the time, or click
the Datepicker or Timepicker icons (
Figure 54.
•
•
Time Zone — In the Timezone field, select the desired time zone from the
•
drop-down menu (
3.
When finished entering settings, click
dialog box without implementing the settings.
Outputs Panel
The Outputs panel (see figure 48,
rate of the outputs, their signal type (HDMI, DTP, or DVI), and the HDCP status of all
connected outputs.
The following status symbols may be displayed for connected outputs:
Symbol
No Display
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Internal Web Pages
Datepicker and Timepicker Screens
Date — On the Datepicker screen, either select the desired date from the
calendar (current month only) or click TODAY to display the current date in the
Date | Time field. To select a different month, click the right and left arrows at
the top of the screen to display the desired month and year.
Time — On the Timepicker screen, click on the hour or minutes above the
clock, then click on the desired number on the clock. To display the current
time in the Date | Time field, click NOW. Select the AM or PM radio button.
).
3
, on page 104) displays the resolution and refresh
5
Definition
The display is HDCP compliant.
The display is not HDCP compliant.
No display is connected.
1
) to display the following panels:
2
(
) to confirm them, or Cancel to close the
Save
4
, on the previous
110
Advertisement
Table of Contents
