Table of Contents
Advertisement
Firmware Panel
The Firmware panel (see figure 48,
it was last updated. You can also update the firmware on your DTP2 CrossPoint 82 from
this panel (firmware files can be downloaded from www.extron.com, see
Updated Firmware
To update firmware:
In the Firmware panel, click the
1.
2.
In the Open dialog box, browse to locate the new firmware file on your computer (by
default the file is stored at C:\Program Files (x86)\Extron\Firmware after being
downloaded from the Extron web page).
NOTE: Firmware files for DTP2 CrossPoint 82 have a .eff extension. Do not attempt
to load any other file types.
3.
Double-click the firmware file name. The Open window closes, and the selected
firmware file name appears in the Update Firmware panel on the web page (see
figure 55,
Figure 55.
4.
Click
Update
upper-right corner of the Update Firmware panel.)
During the updating process, a window appears in the middle of the screen, showing
the progress of the update: Uploading, Initializing, Writing to Flash, and
Rebooting (see figure 56).
Figure 56.
When the update is completed, the progress window closes and the message
Firmware Upload Complete appears near the top of the screen. The new firmware
filename appears beside Version in the Firmware panel of the web page.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Internal Web Pages
) displays the current firmware version and the date
6
on page 114).
Select File
).
1
Firmware Update Dialog Box with a Firmware File Selected
to begin (
). (If you want to cancel the update, click the X button in the
2
Firmware Update Progress Window
Downloading
button.
111
Advertisement
Table of Contents
