Table of Contents
Advertisement
HDCP authentication and signal presence confirmation — Provides real-time
•
verification of HDCP status for each digital video input and output. This allows for
simple, quick, and easy signal and HDCP verification through RS-232, USB, or
Ethernet, providing valuable feedback to a system operator or helpdesk support staff.
•
HDCP Visual Confirmation — When HDCP-encrypted content is transmitted to
a non-HDCP compliant display, a full screen green signal is sent to the display for
immediate visual confirmation that protected content cannot be viewed on that display.
•
Aspect ratio control — The aspect ratio of the video output can be controlled by
selecting a FILL mode, which provides a full-screen output, or a FOLLOW mode, which
preserves the original aspect ratio of the input signal.
Motion-adaptive deinterlacing for signals up to 1080i — Advanced deinterlacing
•
for all interlaced signals up to 1080i delivers optimized image quality.
•
Automatic 3:2 and 2:2 pulldown detection — Advanced film mode processing
techniques help maximize image quality for content sources that originated from film.
•
Auto-Image setup — When activated, the unit automatically optimizes the image by
analyzing and adjusting to the video input signal.
Auto Input Memory — When this feature is activated, the unit automatically stores
•
size, position, and picture settings based on the incoming signal. When the same signal
is detected again, these image settings are recalled from memory.
•
Input presets — Memory presets are available to store and recall optimized image
settings.
Output muting control — Video and audio output can be muted independently.
•
•
Image freeze control — A live image can be frozen using RS-232, USB, or Ethernet
control.
•
On-screen display (OSD) — Intuitive on-screen menus allow for easy system setup
using the front panel controls. Key parameters such as input and output video formats
are grouped on the initial Quick Setup screen, while additional screens provide full
control over other unit functions and settings.
•
Picture controls for brightness, contrast, and detail, as well as horizontal and
vertical sizing, and positioning.
•
Internal video test patterns and pink noise generator for calibration and setup
— The DTP2 CrossPoint 82 provides several video test patterns and audio pink noise to
facilitate proper system setup and calibration of display devices.
•
HDMI to DVI Interface Format Correction — Automatically enables or disables
embedded audio and InfoFrames, and sets the correct color space for proper
connection to HDMI and DVI displays.
•
Automatic color bit depth management — Automatically adjusts color bit depth
based on the display EDID, preventing color compatibility conflicts between source and
display.
Audio file playback — Up to 16 pre-recorded messages can be stored and played
•
back over the program audio output.
•
Audio breakaway — Provides the capability to break two-channel audio away from its
corresponding video signal and route to the DTP2 and audio outputs, allowing the audio
and video signals from one source to be switched to different destinations.
•
Two mic/line inputs with 48-volt phantom power — Two mic or line-level audio
sources can be independently mixed with program audio. Selectable 48-volt phantom
power allows the use of condenser microphones.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Introduction
8
Advertisement
Table of Contents
