Table of Contents
Advertisement
Command
Advanced Configuration
Test Pattern
Set test pattern
View test pattern
Switch Effects
NOTE:
Between input switches the audio ramps down and then up.
Set output switch effect
View setting
Upstream Video Switch Effects
Cut
Seamless cut
View setting
Video Signal Presence
View signal presence
Front Panel Lock (Executive Mode)
Enable lock
Disable lock mode
View lock mode status
KEY:
X2@
= Test patterns
X2(
= Front panel lock (executive mode)
X4%
= Video switch effect
X4(
= Upstream video switch effect
X6!
= Video signal status
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • SIS Configuration and Control
ASCII Command
Response
(Host to Switcher)
(Switcher to Host)
E
X2@
}
1*
TEST
Test1*
E
}
X2@]
1TEST
E O1* X4% SWEF }
SwefO1* X4%]
E O1SWEF }
X4%]
E U1*0SWEF }
SwefU1*0 ]
E U1*1SWEF }
SwefU1*1 ]
E U1SWEF }
X4(]
E
}
X6!
0LS
*...*
Verbose modes 2 and 3:
IN00•
X2(
X2(]
X
Exe
0X
Exe0
X
X2(]
0
= Off (default)
3
= Crosshatch
6
= Audio test (crop pattern with orbiting text
outputting pink noise at LPCM-2Ch, 48 Hz, 24-bit)
0
= Off or disabled (front panel controls fully accessible) (default).
1
= Mode 1 — Complete front panel lockout
2
= Mode 2 — Allows Input switching, logos, and volume control only
3
= Mode 3 — Allows Input switching and logos only
4
= Mode 4 — Volume control only
0 = Cut through black — The input instantly cuts to black, then cuts
to the newly selected input with no fading.
1 = Fade through black —
newly selected input fades in.
2 = Seamless fade (default) —
the previous input while the newly selected input fades in.
3 = Seamless cut —
screen, then cuts to the newly selected input.
Between input switches the audio ramps down and then up.
0
= No switch effect
1
= Seamless cut (default) — The last frame of video
freezes on the screen, then cuts to the newly selected input.
0
= Video, TMDS, or DP signal not detected
1
= Video, TMDS, or DP signal detected
Additional Description
X2@]
Select a test pattern (
View the currently selected test pattern.
Set the output switch effect to
View the current output switch effect.
Set the upstream video switch effect to
Off.
Set the switch effect to seamless cut
(default).
Show current upstream video switch effect
setting
X6!]
View video signal status
X6!
X6!]
*...*
Set front panel lock mode
]
Unlock all front panel controls. All front
panel adjustments can be made.
View current lock mode status
1
2
= Crop
4
= Color Bars
The input fades to black before the
Displays a final frozen frame of
The last frame of video freezes on the
X2@
).
X4%
.
X4(
.
X6!
for all inputs.
X2(
.
X2(
.
= Alternating pixels
5
= Crayscale
AUDIO TEST
and
78
Advertisement
Table of Contents
