Table of Contents
Advertisement
Available picture controls
The Picture Controls submenu adjusts the following picture settings:
NOTE: When the aspect ratio changes as a result of Fill or Follow commands being
entered, the Image Position and Image Size values are updated accordingly.
Auto-Image — Press the Enter button to execute an Auto-Image on the active input,
•
to restore it to the default size and position. Auto-Image updates horizontal and vertical
image position, and horizontal and vertical image size settings.
NOTE: The Auto-Image submenu item is the same as the standard Auto-Image
Execute SIS command. However, there are other Auto-Image options available
through SIS commands. The options include to execute an Auto-Image and fill the
output and to execute an Auto-Image and maintain the input aspect ratio. These
commands ignore the current aspect mode setting, perform Auto-Image on the
input, and then select Fill or Follow.
The following is performed during an Auto-Image when the aspect ratio is set to
•
Fill:
•
Horizontal and vertical image positions return to 0000.
•
Horizontal and vertical image sizes match the current output resolution.
•
The following is performed during an Auto-Image when the aspect ratio is set to
Follow:
•
The horizontal and vertical image position and image size are set to maintain
the native aspect of the input rate with regard to the current output resolution.
Set the aspect ratio on the Advanced submenu (see
•
Image Position — Press the
vertical (V) position of the image. Press the
selected position. The ranges are:
•
Horizontal position:
Vertical position:
•
Press Enter to select the changes and return to the submenu.
Image Size — Press the
•
vertical (V) size of the image. Press the
selected position.
Horizontal size (width):
•
•
Vertical size (height): 10 through
Press Enter to select the changes and return to the submenu.
INn: Brightness — Press the
•
signal. The range is
through
0
Press Enter or
„
to select the changes and return to the submenu.
•
INn: Contrast — Press the
of the video signal. The range is
Press Enter or
ƒ
to select the changes and return to the submenu.
>
•
Detail — Press the
and
through
. The default is
127
Press Enter or
ƒ
to select the changes and return to the submenu.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Operation
ƒ
„
and
buttons to select the horizontal (H) or
>
<
and
through +
pixels. The default is 0000.
-4096
4096
through
lines. The default is 0000.
-2160
+2160
ƒ
„
and
buttons to select the horizontal (H) or
>
and
<
buttons to adjust the value of the
through
of signal
10
8192
of signal
4320
>
and
<
buttons to adjust the black level of the video
. The default is
127
64
>
and
<
buttons to adjust the range of white to black levels
through
. The default is
0
127
<
buttons to adjust the image sharpness. The range is
).
64
INn: Aspect Ratio
on page 43).
buttons to adjust the value of the
.
.
64
0
33
Advertisement
Table of Contents
