Outputs Panel; Firmware Panel - Extron electronics DTP2 CrossPoint 82 User Manual

Scaling presentation switchers
Hide thumbs Also See for DTP2 CrossPoint 82:
Table of Contents

Advertisement

Date — On the Datepicker screen, either select the desired date from the calendar (current month
only) or click TODAY to display the current date in the Date | Time field. To select a different month,
click the right and left arrows at the top of the screen to display the desired month and year.
Time — On the Timepicker screen, click on the hour or minutes above the clock, then click on the
desired number on the clock. To display the current time in the Date | Time field, click NOW. Select the
AM or PM radio button.
Time Zone — In the Timezone field, select the desired time zone from the drop-down list (see
).
3
3. When finished entering settings, click Save (
implementing the settings.

Outputs Panel

The Outputs panel (see
signal type (HDMI, DTP, or DVI), and the HDCP status of all connected outputs.
The following status symbols may be displayed for connected outputs:
Symbol
No Display

Firmware Panel

The Firmware panel (
update the firmware on your DTP2 CrossPoint 82 from this panel (firmware files can be downloaded from
www.extron.com, see
To update firmware:
1. In the Firmware panel, click the Select File button.
2. In the Open dialog box, browse to locate the new firmware file on your computer (by default the file is stored at
C:\Program Files (x86)\Extron\Firmware after being downloaded from the Extron web page).
NOTE: Firmware files for DTP2 CrossPoint 82 have a .eff extension. Do not attempt to load any other file
types.
3. Double-click the firmware file name. The Open window closes, and the selected firmware file name appears in
the Update Firmware panel on the web page (see figure 55,
Figure 55. Firmware Update Dialog Box with a Firmware File Selected
figure
48,
on page 91) displays the resolution and refresh rate of the outputs, their
5
Definition
The display is HDCP compliant.
The display is not HDCP compliant.
No display is connected.
) displays the current firmware version and the date it was last updated. You can also
6
Downloading Updated Firmware
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Internal Web Pages
) to confirm them, or Cancel to close the dialog box without
4
on page 100).
).
1
figure
53,
96

Advertisement

Table of Contents
loading

Table of Contents