Filling The Moistener Tank; Replacing The Ink Cartridge - Pitney Bowes SendPro С User Manual

5. Place your envelope face up, flap down into the feeder. Be sure to slide the envelope flap under
the edge of the feed deck.

Filling the moistener tank

Fill the moistener tank periodically with E-Z Seal® to seal your envelopes.
1. Check the level of E-Z Seal® in your moistener tank.
2. Add enough E-Z Seal® to bring the sealant level up to the bottom of the fill hole. Do not overfill
your tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely saturated.

Replacing the ink cartridge

Replace your ink cartridge promptly when the low ink warning appears. You must maintain an adequate
ink supply to keep the device in optimal working condition.
Pitney Bowes User Guide November 2020
1 • Quick start guide
25