Omron C200HX Operation Manual page 544

Programming Instructions
Code Mnemonic
--- (@)RXD RECEIVE
--- (@)SBBL DOUBLE BINARY
SUBTRACT
--- (@)SCL SCALING
--- (@)SRCH DATA SEARCH
--- (@)STUP CHANGE RS-232C SETUP
--- (@)SUM SUM CALCULATE
--- (@)TKY TEN KEY INPUT
--- (@)TXD TRANSMIT
--- (@)XDMR EXPANSION DM READ
--- (@)XFR2 EM BLOCK TRANSFER
--- ZCPL DOUBLE AREA RANGE
COMPARE
526
Name
Receives data via a communications port.
Subtracts an 8-digit binary value (normal or signed data)
from another and outputs the result to R and R+1.
Performs a scaling conversion on the calculated value.
Searches the specified range of memory for the speci-
fied data. Outputs the word address(es) of words in the
range that contain the data.
Changes the PC Setup settings for the specified port.
Computes the sum of the contents of the words in the
specified range of memory.
Inputs 8 digits of BCD data from a 10-key keypad.
Sends data via a communications port.
The contents of the designated number of words of the
fixed expansion DM data are read and output to the
destination word on the PC side.
Moves content of several consecutive source words to
consecutive destination words. Words in the any valid
EM bank can be specified for the source or destination.
This instruction can be used to change the current bank.
Compares an 8-digit value to a range defined by lower
and upper limits and outputs the result to the GR, EQ,
and LE flags.
Function
Appendix B
Page
333
251
222
318
337
261
350
335
319
190
201