Omron C200HX Operation Manual page 487

Host Link Commands
Response Format
1
x 10 x 10
@
Node no.
Limitations
PC Settings
Execution Conditions
End Codes
10-3-9 IR/SR AREA WRITE –– WR
Command Format
1 0
x 10 x 10
@ W
Node no. Header
code
0 1 0
x 16 x 16 x 16
R E
Header End code
code
Read data (for number of words read)
The text portion of the response's first frame can contain up to 30 words. If more
than 30 words are read, the data will be returned in multiple frames.
In the second and later frames, the text portion of the response can contain up to
31 words.
If a valid bank number is specified but the PC isn't equipped with that EM bank,
"0000" will be returned as the read data.
This command can't be used to change the current bank number.
The INITIALIZE and ABORT commands can be sent instead of the delimiter for
multiple responses for this command. If other commands are sent, they will be
treated the same as delimiters.
PC Mode
RUN MONITOR
OK
Commands
Single
OK
An end code of 14 (format error) will be returned if the length of the command is
incorrect and an end code of 15 (entry number data error) will be returned if the
specified words exceed the data area boundaries, the specified words aren't
specified in BCD, or an invalid bank number is specified.
End code
00 Normal completion
13 FCS error
14 Format error
15 Entry number data error
18 Frame length error
A3 Aborted due to FCS error in transmit data
A8 Aborted due to frame length error in transmit data
Writes data to the IR and SR areas, starting from the specified word. Writing is
done word by word.
3 2 1
x 10 x 10 x 10 x 10
R
Beginning word
(0000 to 0511)
3 2 1 0
x 16 x 16 x 16
Read data (1 word)
PROGRAM Write-protected
OK OK
Multiple
---
Contents
0 3 2 1 0
x 16 x 16 x 16 x 16
Write data (1 word)
Write data
(for number of words to write)
Section 10-3
 ↵
FCS Terminator
UM Area
Read-protected
OK OK
Responses
Single Multiple
OK OK
 ↵
Terminator
FCS
469