Omron C200HX Operation Manual page 531

Standard Models
Model Numbers
The above cable model numbers specify the type of cable, the length, and the type of connectors attached.
1. S3200-CN specifies H-PCF optical fiber cable.
2. The boxes (jjj) are replaced by codes indicating the standard model lengths, as shown below.
Consult with your OMRON representative for longer cables. When ordering longer cables, omit the portion
represented by the boxes and specify the length in meters separately, e.g., S3200-CN-20-20, 30 m.
Code Length
201 2 m
501 5 m
102 10 m
3. The last two portions of the model numbers (e.g., 20-25) specify the connectors, as shown below.
Code Connector
20 S3200-COCF2011
25 S3200-COCF2511
62 S3200-COCH62M
Applicable Optical Fiber Connectors
Model number/Appearance pp
S3200-COCF2011
S3200-COCF2511
S3200-COCH62M
All Plastic Optical Fiber Cable for SYSMAC BUS
Name
All Plastic Optical Fiber Cable
Optical Connectors A
Optical Connectors B
All Plastic Optical Fiber Cable
Set
Optical Fiber Processing Kit
S3200-CNjjj-20-25
1.
Code Length
152 15 m
202 20 m
Omitted Over 20 m
SYSMAC NET
CV500-SNT31
C200HS-SNT32
S3200-LSU03-01E
S3200-NSUA1-00E
S3200-NSUG4-00E
S3200-NSB11-E
C500-SNT31-V4
B700-AL001
Specifications
Cable only; order desired length in 5 m increments
between 5 and 100 m, or in increments of 200 m or
500 m.
Two optical connectors (brown) for APF (10 m max.)
Two optical connectors (black) for APF (8 to 20 m)
1-m cable with an Optical Connector A connected to
each end
Accessory: 125-mm nipper (Muromoto Tekko's 550M)
for APF
2. 3.
Applicable Units
CV500-SLK11
C1000H-SLK11
C200HW-SLK13/14
---
Appendix A
SYSMAC LINK
Model number Standards
3G5A2-PF002
---
3G5A2-CO001
3G5A2-CO002
3G5A2-PF101
3G2A9-TL101
513