Omron C200HX Operation Manual page 484

Host Link Commands
10-3-5 TC STATUS READ –– RG
Command Format
1
x 10 x 10
@
Node no.
Response Format
Limitations
PC Settings
Execution Conditions
End Codes
466
Reads the status of the Completion Flags of the specified number of timers/
counters, starting from the specified timer/counter. A "1" indicates that the
Completion Flag is ON.
0 3 2
x 10 x 10 x 10
R G
Header Beginning timer/counter
code (0000 to 0511)
1 0
x 10 x 10
@
Node no.
The text portion of the response's first frame can contain up to 121 words. If more
than 121 words are read, the data will be returned in multiple frames.
In the second and later frames, the text portion of the response can contain up to
124 words.
The INITIALIZE and ABORT commands can be sent instead of the delimiter for
multiple responses for this command. If other commands are sent, they will be
treated the same as delimiters.
PC Mode
RUN MONITOR
OK
Commands
Single
OK
An end code of 14 (format error) will be returned if the length of the command is
incorrect and an end code of 15 (entry number data error) will be returned if the
specified words exceed the data area boundaries or aren't specified in BCD.
End code
00 Normal completion
13 FCS error
14 Format error
15 Entry number data error
18 Frame length error
A3 Aborted due to FCS error in transmit data
A8 Aborted due to frame length error in transmit data
1 0 3 2 1
x 10 x 10 x 10 x 10 x 10
No. of timers/counters
(0001 to 0512)
ON/
1 0
x 16 x 16
R G
OFF
Header End code
code
Read data
(1 timer/counter)
Read data
(for number of TC read)
PROGRAM Write-protected
OK OK
Multiple
---
Contents
Section 10-3
0
 ↵
FCS Terminator

FCS Terminator
UM Area
Read-protected
OK OK
Responses
Single Multiple
OK OK
↵