Omron C200HX Operation Manual page 521

Host Link Commands
Execution Conditions
End Codes
10-3-40 Undefined Command –– IC
Response Format
Limitations
PC Settings
Execution Conditions
End Codes
Commands
Single
---
There are no end codes with this command.
This response is returned if the header code of a command cannot be decoded.
Check the header code.
x 10
@
Node no.
This error response will be returned if there are fewer than 6 bytes of data be-
tween a command's "@" character and the terminator, an incorrect header code
is used, or a frame is corrupted.
There is no command associated with IC.
PC Mode
RUN MONITOR
OK OK
Commands
Single
---
There are no end codes with this command.
Multiple Single
--- OK
1 0
x 10
I C
Header FCS
code
PROGRAM Write-protected
OK OK
Multiple Single
--- OK
Section 10-3
Responses
Multiple
---
 ↵
Terminator
UM Area
Read-protected
OK
Responses
Multiple
---
503