Omron C200HX Operation Manual page 519

Host Link Commands
Response Format
1 0
x 10 x 10
@
Node no.
Limitations
PC Settings
Execution Conditions
End Codes
10-3-37 ABORT –– XZ
Command Format
1
x 16 x 16
Q Q I R
Header Sub-header End code
code code
ON/
,
,
OFF
Bit data
ON/OFF
The data is read in the same order in which it was registered with QQMR.
A response of "0000" will be returned for non-existent words such as DM 6656 to
DM 6999, unallocated expansion DM, or non-existent EM banks.
The INITIALIZE and ABORT commands can be sent instead of the delimiter for
multiple responses for this command. If other commands are sent, they will be
treated the same as delimiters.
PC Mode
RUN MONITOR
OK
Commands
Single
OK
An end code of 14 (format error) will be returned if the length of the command is
incorrect.
An end code of 19 (not executable) will be returned if there is no registered data.
End code
00 Normal completion
13 FCS error
14 Format error
18 Frame length error
19 Not executable
A3 Aborted due to FCS error in transmit data
A8 Aborted due to frame length error in transmit data
Aborts the Host Link command that is currently being processed, allowing the
next command to be received. The ABORT command does not receive a re-
sponse.
@
ON/
0 3 2 1
x 10 x 10 x 10
OFF
Timer/Counter
If PV is specified the sta-
tus of the Completion Flag
is also returned.
3 2
, x 16 x 16 x 16
Word data
IR, SR, LR, HR,
AR, DM
PROGRAM Write-protected
OK OK
Multiple
---
Contents
1 0
x 10 x 10
X Z
Node no. Header
code
Section 10-3
0
x 10
,
Data break
 ↵
1 0
x 16
FCS Terminator
UM Area
Read-protected
OK OK
Responses
Single Multiple
OK OK
 ↵
FCS Terminator
501