Omron C200HX Operation Manual page 180

Hide thumbs Also See for C200HX:

Table of Contents

Timer and Counter Instructions

One-Shot Bits

01000 TIM 001

002; 00000 in an inverse condition is necessary to reset TIM 002 when 00000

goes ON and 00500 is necessary to activate TIM 002 (when 00000 is OFF).

The length of time that a bit is kept ON or OFF can be controlled by combining

TIM with OUT or OUT NO. The following diagram demonstrates how this is pos-

sible. In this example, 00204 would remain ON for 1.5 seconds after 00000 goes

ON regardless of the time 00000 stays ON. This is achieved by using 01000 as a

self-maintaining bit activated by 00000 and turning ON 00204 through it. When

TIM 001 comes ON (i.e., when the SV of TIM 001 has expired), 00204 will be

turned OFF through TIM 001 (i.e., TIM 001 will turn ON which, as an inverse

condition, creates an OFF execution condition for OUT 00204).

Address Instruction

Section 5-14

Chapters

Table of Contents

C200hg C200he