Omron C200HX Operation Manual page 516

Host Link Commands
10-3-34 I/O TABLE GENERATE –– MI
Command Format
Response Format
PC Settings
Execution Conditions
End Codes
498
End code
14 Format error
15 Entry number data error
18 Frame length error
19 Not executable
23 User memory protected
A3 Aborted due to FCS error in transmit data
A4 Aborted due to format error in transmit data
A5 Aborted due to entry number data error in transmit data
A8 Aborted due to frame length error in transmit data
Corrects the registered I/O table to match the actual I/O table.
@
@ x 10
Node no.
PC Mode
RUN MONITOR
---
Commands
Single
OK
An end code of 14 (format error) will be returned if the length of the command is
incorrect.
End code
00 Normal completion
01 Not executable in RUN mode
02 Not executable in MONITOR mode
03 UM write-protected
13 FCS error
14 Format error
18 Frame length error
20 Couldn't create I/O table
Note The write-protected error code for this command is different from the other com-
mands.
Contents
1 0
x 10 x 10 M I
Node no. Header
code
1 0 1
x 10 M I x 16 x 16
Header End code
code
PROGRAM Write-protected
--- OK
Multiple
---
Contents
Section 10-3
 ↵
FCS Terminator
 ↵
0
FCS Terminator
UM Area
Read-protected
--- OK
Responses
Single Multiple
OK ---