Omron C200HX Operation Manual page 518

Host Link Commands
Limitations
PC Settings
Execution Conditions
End Codes
10-3-36 COMPOUND COMMAND DATA READ –– QQIR
Command Format
500
The registered data is checked from the beginning and the data will be regis-
tered up to any errors. For example, if a command attempts to register 129
items, a frame length error (end code 18) will occur but the first 128 items will be
registered.
DM 6656 to DM 6999 do not exist, but an error will not occur if you try to register
these words.
Bits and words can be specified in any order and they will be registered in the
order that they were specified.
The data can be divided into multiple frames.
PC Mode
RUN MONITOR
OK OK
Commands
Single
OK
An end code of 14 (format error) will be returned if the length of the command is
incorrect or the "," data break between two items is omitted.
An end code of 15 (entry number data error) will be returned if the "Read area,"
"Read word address," or "Data format" setting is incorrect.
End code
00 Normal completion
13 FCS error
14 Format error
15 Entry number data error
18 Frame length error
19 Not executable
A3 Aborted due to FCS error in transmit data
A4 Aborted due to format error in transmit data
A5 Aborted due to entry number data error in transmit data
A8 Aborted due to frame length error in transmit data
The bit, word, and timer/counter status is read as a batch according to the read
information that was registered with QQMR.
1 0
x 10 x 10
@
Node no.
PROGRAM Write-protected
OK OK
Multiple Single
OK OK
Contents
Q Q I R
Header Sub-header
code code
Section 10-3
UM Area
Read-protected
OK
Responses
Multiple
---
 ↵
FCS Terminator