Omron C200HX Operation Manual page 486

Host Link Commands
10-3-7 AR AREA READ –– RJ
Command Format
1
x 10 x 10
@
Node no.
Response Format
1
x 10 x 10
@
Node no.
Limitations
PC Settings
Execution Conditions
End Codes
10-3-8 EM AREA READ –– RE
Command Format
1 0
x 10 x 10
@ R
Node no. Header
code
468
Reads the contents of the specified number of AR words, starting from the speci-
fied word.
0 3 2
x 10 x 10 x 10
R J
Header Beginning word
code (0000 to 0027)
0 1 0
x 16 x 16 x 16
R J
Header End code
code
The text portion of the response's first frame can contain up to 30 words.
PC Mode
RUN MONITOR
OK
Commands
Single
OK
An end code of 14 (format error) will be returned if the length of the command is
incorrect and an end code of 15 (entry number data error) will be returned if the
specified words exceed the data area boundaries or aren't specified in BCD.
End code
00 Normal completion
13 FCS error
14 Format error
15 Entry number data error
18 Frame length error
Reads the contents of the specified number of EM words, starting from the spe-
cified word in the specified EM bank.
3
x 10 x 10
E Bank No.
Bank no. Beginning word
(See note.) (0000 to 6143)
Note Input 00, 01, or 02 to specify bank number 0, 1, or 2. Input two spaces to specify
the current bank.
1 0 3 2 1
x 10 x 10 x 10 x 10 x 10
No. of words
(0001 to 0028)
3 2 1 0
x 16 x 16 x 16
Read data (1 word )
Read data
(for number of words read)
PROGRAM Write-protected
OK OK
Multiple
---
Contents
2 1 0 3 2
x 10 x 10 x 10 x 10 x 10
No. of words
(0001 to 6144)
Section 10-3
0
 ↵
FCS Terminator
 ↵
FCS Terminator
UM Area
Read-protected
OK OK
Responses
Single Multiple
OK ---
1 0

x 10
FCS Terminator
↵