Omron C200HX Operation Manual page 533

Standard Models
Name
Optical Fiber Cable Connector
Note: 1. Optical fiber cables must be prepared and connected by specialists.
2. If the user prepares and connects optical fiber cables, the user must take a seminar held under the aus-
pices of Sumitomo Electric Industries, Ltd. and obtain a proper certificate.
3. The Optical Power Tester, Head Unit, Master Fiber Set, and Optical Fiber Assembling Tool are required to
connect optical fiber cables.
4. You may want to use the Plastic Clad Optical Fiber Cable/All Plastic Optical Fiber Cable with connectors
listed on the previous two pages.
Optical Fiber Assembling Tool
Name
Optical Fiber Assembling Tool
Note: 1. Optical fiber cables must be prepared and connected by specialists.
2. The Optical Power Tester, Head Unit, Master Fiber set, and Optical Fiber Assembling Tool are required to
connect optical fiber cables.
Specifications
SYSMAC NET:
S3200-LSU03-01E
B700-AL001
C500-SNT31-V4
SYSMAC BUS:
C200H-RM001-PV1
C200H-RT001/RT002-P
C500-RM001-(P)V1
C500-RT001/RT002-(P)V1
3G2A9-jjj(-P)
SYSMAC NET/SYSMAC LINK
C200HS-SNT32
C200HW-SLK13/14
SYSMAC NET/SYSMAC LINK
CV500-SNT31
CV500-SLK11
CV1000H-SLK11
To relay at all SYSMAC NET
nodes. nodes
Specifications
Used to connect H-PCF and crimp-cut connectors
for optical transmission systems such as the SYS-
MAC C- and CV-series SYSMAC BUS, SYSMAC
LINK and SYSMAC NET.
Model number
Full-lock con- S3200-COCH62M
nector for NSU,
NSB, and C500
SYSMAC NET
Link Unit
Half-lock con- S3200-COCH82
nector for Re-
mote I/O Mas-
ter, Remote I/O
Slave, Host Link
Unit, and Link
Adapter
Half-lock con- S3200-COCF2511
nector
Full-lock con- S3200-COCF2011
nector
COCF62M and S3200-COCF62M
COCF62F are COCF62F are
S3200-COCF62F
used as a pair.
Model number
S3200-CAK1062
Appendix A
Stan-
dards
---
Stan-
dards
---
515