Commissioning - Festo VTSA Series Description

4. Commissioning

Contents of this chapter
Further information
Festo P.BE−VTSA−44−EN en 0905e
This chapter describes the commissioning of the VTSA... valve
terminal. This specifically includes the following:
Instructions on building up pressure in the overall supply
Operating the manual overrides
Checking the valves and the valve/actuator combination
The assignment of LEDs and manual overrides to the sole
noid coils
Malfunctions
Operating states of the pneumatic system
Commissioning the CPX terminal is described in the relevant
manual for the CPX field bus node.
The commissioning process for the FB21 (type 03) is
described in the manual for the FB 21 electronics.
4−3