Related topics:
Installing the server cover
Replacing a hard disk drive
Removing a hard disk drive
About this task
Important:
To ensure adequate system cooling, do not operate the server for more than 2 minutes
without either a hard disk drive or a filler panel installed in each bay.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. See
Procedure
1. Slide the release latch (orange) gently to the left to unlock the drive handle. See the
Maintaining the Avaya S8800 Server for Avaya Aura
on page 16
Protecting against ESD damage
following figure.
1
for more information.
Drive tray assembly
®
SIP Enablement Services
Replacing a hard disk drive
November 2009
25