3
6
4
Setting Manual Delivery
You can set to manually deliver device information.
IMPORTANT
• When delivering device information, the following machines will not update their information:
- Machines which are processing a send job
- Machines importing or exporting data via the Remote UI
- Machines which are executing functions from the Additional Functions screen
- Machines which are having their address books accessed
• In addition to the above, machines which are having their address books accessed or sending a print
job will not update their address books, and machines performing a print job will not update their Printer
Settings.
6-52
Specifying Device Information Delivery Settings
Select which device information you want to deliver ➞ press [Next].
Details of each item are shown below.
[On]:
The machine will deliver the selected device information.
[Off]:
The machine will not deliver the selected device information.
<Network Settings>:
Available when [On] is selected for <Add. Functions Settings Value>. Select [Include] to deliver
the network settings, or [Exclude] to not deliver the network settings ➞ press [Done].
NOTE
If the optional imagePRESS Server is attached, <Network Settings> is always set to 'Exclude'.
Select the destinations ➞ press [OK].