Canon imagePRESS C1+ Reference Manual page 124

2
2-52
Making Prints Using the Stack Bypass
❑
Press [OK] ➞ proceed to step 6.
If the following screen is displayed, press [OK] ➞ adjust the width of the slide guides ➞
specify the desired paper size.
If the following screen is displayed, adjust the width of the slide guides to match the paper
size stored in Stack Bypass Standard Settings, or set Stack Bypass Standard Settings to
'Off' in Common Settings (from the Additional Functions screen). (See "Standard Paper for
the Stack Bypass," on p. 4-48.)
IMPORTANT
Set the paper size to the same size as the paper loaded in the stack bypass.