NOTE
• Before setting <Use SSL> to 'On', it is necessary to set a default key in Network Settings (from
the Additional Functions screen). (See Chapter 3, "Using a TCP/IP Network," in the Network
Guide.)
• The Remote UI is enabled only after you restart the machine (the main power is turned OFF, and
then back ON). For instructions on restarting (turning the main power OFF, and then back ON)
the machine, see "Main Power and Control Panel Power," on p. 1-18.
• Any changes made to <Use SSL> are also applied to <Use SSL> in <Use HTTP> in MEAP
Settings in System Settings (from the Additional Functions screen).
6-21
Remote UI
6