Canon imagePRESS C1+ Reference Manual page 109

1
Lift the feeder/platen cover.
IMPORTANT
This machine is equipped with an open/close sensor on the feeder/platen cover (see circled area
in the above illustration). When placing originals on the platen glass, lift the feeder/platen cover
approximately 300 mm so that the sensor detaches from the feeder/platen cover. If the sensor
does not detach from the feeder/platen cover, the size of the originals may not be detected
correctly.
2
Place your originals face down.
Sensor
Placing Originals
2
2-37