Canon imagePRESS C1+ Reference Manual page 574

# 861
Cause
Remedy
# 862
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
# 863
Cause
Remedy
# 864
Cause 1
Remedy
8
Cause 2
Remedy
# 865
Cause 1
Remedy
Cause 2
Remedy
8-80
List of Error Messages
An error occurred while processing PDL data or image data.
Confirm the print settings you made when printing from a computer.
The saddle finisher trays have exceeded their stacking limits. (See Chapter 9, "Appendix.")
Change the print data or print settings, and try printing again.
A combination of settings which is not supported was set.
Change the print data or print settings, and try printing again.
Image data or data which is not guaranteed to be compatible was printed.
Change the print data or print settings, and try printing again.
An error occurred while processing PDL data or image data.
Check the settings, and try printing again.
The external controller or controller board is not attached, or is not functioning properly.
Contact your System Manager.
The external controller or controller board cannot be recognized correctly.
Contact your System Manager.
The functions related to job execution are restricted.
Contact your System Manager.
When trying to send a PDL data containing clear data, the job was cancelled.
Contact your local authorized Canon dealer.