Canon imagePRESS C1+ Reference Manual page 418

9
10
6
6-134
Registering/Editing Custom Paper Types
Turn over the test print ➞ check the lead edge image on the back side
of the test print.
In the above example, the centre line of the register mark is inside the lead edge of the test
print.
Press [-] or [+] for <Back Side> to input the number of pixels to shift
the image.
Input the value from the test print paper.
Following the example in step 9, input [-6] for <Back Side>.
[+]: Press when the centre line of the register mark is located outside the edge of the test
print (the centre line of the register mark is NOT printed). The image is shifted the number
of pixels entered opposite the feeding direction of the paper.
[-]: Press when the centre line of the register mark is located inside of the edge of the test
print. The image is shifted the number of pixels entered toward the feeding direction of
the paper.