Changing The Language Shown On The Touch Panel Display - Canon imagePRESS C1+ Reference Manual

Changing the Language Shown on the Touch Panel
Display
You can select the language displayed on the touch panel display.
NOTE
• If Language Switch is set to 'On', some characters are restricted and cannot be entered. To be able to
enter all characters, set Language Switch to 'Off'.
• Even if Language Switch is set to 'On', there are some languages that cannot be displayed.
1
2
4
4-54
Specifying Common Settings
➞ [Common Settings] ➞ [Language Switch].
Press
Press [On] ➞ select the desired language ➞ press [OK].
If you do not want to change the display language, press [Off].
If you press [Display Shortcut Key], [
Basic Features screen. [
IMPORTANT
• Some messages may not be displayed properly in the language that you just selected. In this
case, restart the machine (turn the machine OFF, and then back ON). For instructions on
restarting (turning the main power OFF, and then back ON) the machine, see "Main Power and
Control Panel Power," on p. 1-18.
• If SSO-H or SSO is set as the login service, and there is a difference between the language set
on the machine and the one set in Active Directory, the sender's full name will not be displayed in
e-mail messages sent to the recipient.
] will be displayed next to [System Monitor] on the
] is a shortcut key to the Language Switch screen.