Sample System Configurations - Canon imagePRESS C1+ Reference Manual

a Feeder (DADF-R1)
Originals placed in the feeder are automatically fed sheet
by sheet to the platen glass for scanning. The feeder also
automatically turns over two-sided originals to make one- or
two- sided copies. If you selected the Color Image
Reader-H1 when purchasing the machine, it comes with a
platen cover instead of a feeder.
b Paper Deck-AA1
The Paper Deck-AA1 provides an additional source of
paper for printing jobs.
The Paper Deck-AA1 holds up to 3,500 sheets of paper 80
2
g/m .
c Punch Unit-L1/N1/P1
The Punch Unit-L1/N1/P1 is equipped with the Hole Punch
feature.
d Staple Cartridge-D2/D3
The Staple Cartridge-D2/D3 can be attached to the optional
Saddle Finisher-AA2 for saddle stitching.
e Staple Cartridge-J1
The Staple Cartridge-J1 can be attached to the optional
finisher for stapling (Corner and Double).

Sample System Configurations

Different optional equipment can be attached to the machine to form various system
configurations. The illustration below is only example of one possible system configuration. For
more information on the complete range of optional equipment configurations, contact your
local authorized Canon dealer.
The optional Feeder (DADF-R1), Saddle Finisher-AA2, Punch Unit-L1, Card
Reader-C1, and Paper Deck-AA1 are attached.
f Saddle Finisher-AA2
The Saddle Finisher-AA2 is equipped with the following
features: Collate, Group, Offset, and Staple (Corner,
Double, and Saddle Stitch).
g Finisher-AA1
The Finisher-AA1 is equipped with the following features:
Collate, Group, Offset, and Staple (Corner and Double).
h Platen Cover Type K
The Platen Cover Type-K holds down originals on the
platen glass of the Color Image Reader-H1.
i Card Reader-C1
The Card Reader-C1 enables Department ID Management
to be performed by using the control card.
j Document Tray-J1
k Stack Bypass Alignment Tray-B1
The Stack Bypass Alignment Tray-B1 corrects the bias of
the paper loaded into the stack bypass.
l Color Image Reader-H1
The Color Image Reader-H1 is necessary to use the Copy
and Scan functions.
System Configuration
3
3-3