Tone Settings
You can set whether to sound audible tones. The following tones sound at the following times:
• Entry Tone:
• Invalid Entry Tone:
• Restock Supplies Tone:
• Error Tone:
• Job Done Tone:
• Forgot Original Tone:
4
1
2
Display the Remaining Paper Message
You can set to display the message indicating that the remaining paper loaded in a paper
drawer is low.
1
2
4-30
Specifying Common Settings
When pressing keys on the control panel or keys on the touch panel
display
When an invalid key on the control panel or touch panel display is
pressed, or when the maximum number of characters allowed is
exceeded
When the toner cartridge needs to be replaced
When a malfunction occurs (e.g., paper jam or operational error)
After a job completes (e.g., outputting or stapling is complete)
When placing originals in the feeder while an original remains on the
platen glass, or vice versa
➞ [Common Settings] ➞ [Audible Tones].
Press
Select [On] or [Off] for the desired tones ➞ press [OK].
➞ [Common Settings] ➞ [Display Remaining Paper Message].
Press
Select [On] or [Off] ➞ press [OK].