Canon imagePRESS C1+ Reference Manual page 329

2
Register a destination.
● To manually register a destination:
❑
Press [Register].
❑
Enter the IP address of the destination or FQDN (Fully Qualified Domain Name) (i.e.,
starfish.organization.company.com) ➞ press [OK].
NOTE
• For instructions on entering characters, see "Entering Characters from the Touch Panel Display,"
on p. 2-25.
• If any of the following is true for the destination machine, a message <Could not retrieve
information for the device to register. Register as a destination?> is displayed. If you press [Yes],
<Deliverable Settings> on the Details screen will be blank.
- The main power is turned OFF
- The destination machine is not connected to the network
- Every function in Receive Restriction for Each Function under <Receiving Settings> in Device
Information Delivery Settings is set to 'On'
Specifying Device Information Delivery Settings
6
6-45